$700 OFF + FREE Shipping + 0% Financing
– Free Shipping In The USA And Canada.
– Free 30 To 50-Amp Adapter Cable Included.
– 90-Days To Try It, Or Return For Full Refund.
SoftStartUp™ – The Only Plug & Play RV A/C Soft Start Controller Proven To
Start And Run 2 A/C Units
On 30 And 50 Amp Power Sources.
Works Right Out Of The Box!
Start 2 A/C Units Together On Low Power.
No Wiring. No Climbing. No Tools Needed.
- Starts 2 RV A/Cs on a 30-amp or 50-amp power pole
- Starts 2 RV A/Cs on a 3,000-watt generator
- Starts 1 RV A/C on a 2,200-watt generator
- Starts 1 RV A/C on a 20-amp house circuit
Works Right Out Of The Box - Just Plug It In!
This is How You Eliminate Low-Power A/C Start-Up Problems in Your RV.
SoftStartUp takes milliseconds to cut the amps needed to start multiple RV A/C units and appliances, extends your A/C compressor’s life, and controls the power in your RV with maximum efficiency.
Moments after opening your package, you will enjoy the benefits of having the world’s highest reviewed RV soft starter. There’s:
- NO CLIMBING up your RV roof
- NO OPENING up your A/C unit(s)
- NO NEED to figure out the wiring and connections
- NO PAYING a service center to install it for you
OPTIMIZE YOUR POWER
Features
- Reduces A/C Startup Inrush Currrent by 50%
- Starts Multiple RV Appliances Simultaneously
- Plug-in Ready – No Installation or Wiring
- Overload Protection
- Extends Compressor Life
- Portable – Just Unplug It to Use on Another RV
Benefits
- Free 30-Amp Power Adapter
- Water- & Fire-Resistant Case
- Designed and Assembled in USA
- 1-Year Warranty
- 90-Day Trial – Love It or Return It
- Money Back Guarantee
- Free Shipping in the USA & Canada
Special Notes:
- If using a surge protector, plug
the surge protector into the power
supply first, then plug the SoftStartUp into the surge protector. - SoftStartUp does not produce more power. It optimizes your power.
- SoftStartUp doe not work with an Auto Transfer Switch (ATS).
Proven to Start and Run RV A/C Units with
Power Poles, Generators, Inverters & House Circuits
Starting A 15,000 BTU A/C On A 2000-Watt Inverter.
In this video, Mike demonstrates using a 2000 watt inverter, the Jackery Explorer 2000, with a SoftStartUp™ to successfully start and run a Truma Aventa 15,000 BTU air conditioner.
He explains that the SoftStartUp™ eliminates the need for rooftop installation, and can be plugged into various power sources, including 15, 30, or 50 amp power sources.
Mike also shows that the inrush current needed to start the A/C is reduced to 26.6 amps, about 50% down from the typical 50-60 amps needed to get the A/C going. He highlights the effectiveness of the SoftStartUp™ and notes how innovative the product is.
Starting 2 A/Cs On A 30-Amp Power Pedestal.
In this video, Mike from RVElectricity.com demonstrates the use of a SoftStartUp™ device that allows for the efficient operation of multiple air conditioners in an RV.
He demonstrates that the SoftStartUp™ can be connected to the shore power, a generator or other power sources, and doesn’t require installation directly into the air conditioner unit.
Mike shows the testing process, recording voltage and current data, and highlights the ability of the SoftStartUp™ to power two 15K air conditioners simultaneously. He also mentions the versatility of the device, which can be used not only for RVs but also for powering houses in emergency situations.
Starting 1 A/C On A 2200-Watt Generator.
In this video, Mike tests the SoftStartUp™ with a Honda 2200 inverter generator and a Truma 15,000 BTU Aventa air conditioner.
He shows the real-time current draw, voltage, and inrush current, highlighting how the SoftStartUp™ significantly reduces inrush current, helping the generator avoid tripping.
The SoftStartUp™ works quickly and effectively. Overall, the device proves to be a great solution for managing the power supply of RV air conditioners and other appliances.
Starting 2 A/Cs On A 3000-Watt Generator.
In this video, Mike demonstrates the new SoftStartUp™ unit helping two 15k BTU air conditioners to be powered by a 3000 watt generator.
This eliminates the need to install a single soft start device in each RV rooftop A/C unit.
He measures the starting amps, running amps and voltage of the 2 air conditioners, and demonstrates how the units work when a SoftStartUp™ is in the mix.
Mike speaks to the all new SoftStartUp™ exceeding expectations and it’s solid performance.
Starting 2 A/Cs On A 30-Amp Power Pedestal.
In this video, Mike from RVElectricity.com demonstrates the use of a SoftStartUp™ device that allows for the efficient operation of multiple air conditioners in an RV.
He demonstrates that the SoftStartUp™ can be connected to the shore power, a generator or other power sources, and doesn’t require installation directly into the air conditioner unit.
Mike shows the testing process, recording voltage and current data, and highlights the ability of the SoftStartUp™ to power two 15K air conditioners simultaneously. He also mentions the versatility of the device, which can be used not only for RVs but also for powering houses in emergency situations.
IT WORKS RIGHT OUT OF THE BOX!
Just plug in your SoftStartUp™, and enjoy all the benefits instantly.
SoftStartUp™ Advanced RV A/C Soft Starter Easy to install, Easy to Use.
An innovative breakthrough in powering your RV, the SoftStartUp soft starter works with either 50-amp or 30-amp power sources with features unlike any other soft starter today.
The only soft start device
proven to start 2 A/C
units on low power.
Smoother, reduced amperage A/C
startups extend A/C compressor life.
Instant comfort –
Just plug it in!
Compatible with and optimizes all RV power sources.
Plug & Play For Easy Operation
The LEDs on the front of the SoftStartUp module indicate the power status on each leg of the input.
1. Plug SoftStartUp into power supply.
NOTE: If using a surge protector, plug the surge protector into the power supply first, then plug the SoftStartUp into the surge protector.
2. Allow diagnostic function to check power source.
- Both LEDs turn on for 3 seconds, then both turn off.
- Then the active curcuit(s) will turn on.
3. Power Indicators
- Left Light Flashing: 30-amp power
- Both Lights Flashing: 50-amp power
- Steady Light: Incoming, Power issues (Refer to softstartup.com/support for details.)
4. Connect RV Power Cord
- Plug the RV Power cord into the SoftStartUp receptaclel
Technical Specifications
| Model number: | SSUP50 |
| Voltage: | 120V/240V, 50 Amps: 60 Hz 120V, 30 Amps: 60 Hz |
| Amp. Rating | 50 Amps |
| Power Consumption: | < 1 Watt |
| Max. Ambient Temperature | 122ºF (50ºC) |
| Enclosure Rating | IP65 (dust-tight, water-resistant) |
| Dimensions: | 30”h x 6.37”w x 2.35”d (76.2 cm × 16 cm × 6 cm) |
| Weight: | 2.5 lb. (1.13 kg) |
| Warranty: | One-year limited warranty (standard) |
| In the Package: | SoftStartUp soft start controller 30-amp to 50-amp adapter Instructions |
| Specifications are subject to change without notice. |
Dimensions
SoftStartUp should not be used with an onboard Automatic Transfer Swith
Order Your SoftStartUp™ Advanced Plug & Play RV A/C Soft Starter
OR